Amerex 05614 Instrukcja Użytkownika

OWNERS SERVICE MANUAL NO. 05614 INSTALLATION, OPERATING & SERVICING INSTRUCTIONS

9 Item No. Part No. Description Std. Pkg. 1 06993 Cap, Agent Cylinder 1 1A 12576 Cap, Agent Cylinder w/Pressure Indicato

1 INTRODUCTION THIS MANUAL IS ATTACHED TO EVERY NEW EXTINGUISHER SHIPPED FROM THE FACTORY. IT CONTAINS VALUABLE INFORMATION WHICH SH

2 OPERATION – After the fire has been successfully extinguished and it has been determined that it is completely out: 1. Confirm that

3 INSPECTING THE EXTINGUISHER MAINTENANCE At least once a year or more frequently if circumstances require, maintenance should be performed. Ma

4 5. Check the gauge on the nitrogen cylinder. If the pressure is below 1700 psig (11.7 mPa) repressurize the cylinder to 2015 psig (13.9 mPa) or

5 d. AFTER ALL PRESSURE HAS BEEN RELIEVED, SLOWLY OPEN THE FILL CAP AND REMOVE THE TEST KIT VENT SPACER. e. Re-examine the dry chemical

6 2. Complete items 1 – 6 of Maintenance Procedures. Carefully remove the fill cap. While performing this procedure, all parts and seals should be

7 TROUBLESHOOTING GUIDE WARNING: BEFORE ATTEMPTING TO CORRECT ANY LEAKAGE PROBLEM, BE SURE THAT THE AGENT CYLINDER IS COMPLETELY DEPRES

8 1 Connect hose coupling to outlet on the extinguisher. Lay hose straight on ground to its full 50 ft. length. S